There are numerous reasons that could require you to put in ramps for wheelchairs in your home. A member of the household might require an ambulator, wheelchair, or scooter because of injuries, illness or age. In these situations an accessible ramp for wheelchairs will ensure that they can get into and out of the home in a safe and secure manner. However, the installation of wheelchair ramps in homes should be carried out cautiously and carefully to ensure the safety of all who uses them and to ensure that it does not violate any laws, whether federal or local.
Different types of ramps for wheelchairs
There are two principal materials that are used to construct the handrails and frame of the ramp for wheelchairs. For the majority of DIY ramp builders it is best to buy pre-fabricated set-ups for ramps that are modular. Be sure to select one that has the proper dimensions, dimensions and other components to fit your home as well as the wheelchair user making use of the ramp.
Aluminum ramp for wheelchairs
Aluminum wheelchair ramps tend to be stronger and last longer. A lot of modular threshold ramps that are pre-fabricated are constructed from aluminum. If you decide to construct ramps for wheelchairs made of such materials, you must ensure that the handrails and the platform have composite materials laid over the ramps. If not, they’ll get slippery and risky in rainy weather.
Wooden ramp for wheelchairs
Although you may construct ramps for wheelchairs out of wood, the materials is required to be durable enough to hold the weight of users of wheelchairs. A lot of ramps are constructed from concrete and have wooden handrails because of this.
Guidelines for installing ramps for wheelchairs
The construction of a ramp for wheelchairs for commercial buildings is a strict set of guidelines and codes that were outlined by the Americans with Disabilities Act in 1990. Commercial properties must adhere to these guidelines exactly to the letter.
Although following these guidelines may be more challenging for homes It’s best to follow them as close as you can physically. Also, you should look up any local building codes and talk to Your Home Owners Association before getting going with the wheelchair ramp installation.
In accordance with guidelines of the ADA ramp regulations accessible ramps must be in line with certain ratios and dimensions when it comes to the slope length, width, width and height of the ramp in addition to other aspects. For instance, you have to have ramps with handrails both ways of the ramp if the ramp rises higher than 6 inches. The ramps must also include a the flat platform or landing at the bottom and the top.
How do you install your ramp for wheelchairs with thresholds
Modular diy wheelchair ramps are available in various sizes, materials and parts. There are however a few essential steps to take in the process of installing.
Step 1: Placement and positioning of your ramp
If you’re facing an extensive front yard as well as a an open front door it shouldn’t be a problem issues building straight ramps. If you’re limited in space You may want to think about a ramp that is L-shaped that extends from the backyard towards the entrance instead.
Start by measuring the rise in total between the base of the ramp where it will start and the height that it will reach at the point where it will be finished. It is possible to use these measurements to determine the slope you’ll require to construct your ramp on and the length your ramp must be. The majority of modular ramp manufacturers offer measurement charts to assist you in understanding these numbers.
Step 2: Choose the correct modular ramp that matches your measurements.
Once you’ve got an understanding of the dimensions that you’ll have a more understanding of the type of ramp for wheelchairs you’ll build as well as the various parts that you’ll need. Select a ramp installation set that is sized to the angles and lengths you’ll require.
Step 3. Draw out your modular parts and put them together
Utilize the installation guideline drawing to draw out the various components that make up the ramp exactly as they appear on the diagram. Allow enough space between each component to allow you to be able to work around them while building everything.
You should ensure you have the tools needed at hand. Different ramps will require different kinds of nuts, bolts , and attachments. You’ll most likely require:
- Measuring tape
- Socket wrench
- Level
- Power drill
- Allen wrench
- Philips head screwdriver
- Metal file
- Hammer
Step 4 4. Follow the installation guideline carefully
It is essential to follow the directions given by the manufacturer step-by- process to make a correct installation, which results in a secure wheelchair ramp. It is essential to put together each portion of the ramp, as well as the handrails before you put them together in the entrance of your home.
Step 5 Check your newly installed ramp
After the ramp has been installed it is time to test its strength and stability. Make sure that all legs are on the ground prior to and during the use. Check each part carefully to make sure all nuts, screws and bolts are securely secured.
Also Read Interesting Articles At: Blue Gray Daily.