Hot weather is here, so don’t run your AC 24/7. Industrial swamp coolers are a great alternative to your AC. You’ll be able to save money on your heating costs, and your home will stay cooler. This article will tell you what to look at when buying a swamp warmer pad and how I install it properly.
Six things to consider before you install an industrial cooler
It would help to choose an industrial cooler that meets all your needs. These are the key factors to ensure that your industrial evaporative cooler delivers maximum performance.
- Climate
Be aware that an evaporative cooler has one problem. This equipment is not designed to work in humid environments. This equipment can only be bought if you live in a dry location.
- Location
These coolers draw out outside Air, so they must not be installed inside the house. It can also be mounted on windows depending on the room you are cooling. It can be placed on rooftops, attics, and ground level to cool whole buildings. Industrial coolers also need water to function properly, so ensure the cooler is located near a water source.
- Water exchange
Install a water bleed-off device to keep your cooler’s cool water from getting too salty. The bleed-off system makes it easier to maintain your cooler. You’ll need to use five additional gallons of water every hour.
- Size
Cube Meter Hour (CMH) measures the cooling capacity of an evaporated cooler. A small evaporative coolant system might be capable of cooling 6000 CMH. However, a larger unit is capable of cooling 25,000 CMH. The size of your house will determine how much CMH is required.
- Features
The features of a cooler are also important aspects to consider when buying one. The best evaporative coolers have multiple fan speeds and one vent-only option. You can adjust the temperature of your cooler to match weather conditions.
- Where Can An Industrial Cooler Be Located?
The industrial air cooler is designed to cool Air and moisten it via evaporation. It is cost-effective and more eco-friendly than traditional AC units. It also works better than an outdoor fan.
Tips To Install an Industrial Air Cooler
1. Mounting the Cooler
An industrial air conditioning unit must be placed outside your house or business premises. It is possible to install the cooler in various places, depending on which model you choose.
* Roof-mounted coolers are more popular but require more maintenance.
* Window Mounted/wall: Maintaining a window-mounted or wall unit is very simple. This unit also helps to reduce the risk of house leaks. It is important to remember that the coolers mounted on walls/windows circulate chilled Air throughout the house to a single location.
2. Installation Height
Keep at least 10 feet from industrial cooling towers and 3 feet from plumbing exhaust fan vents. Keep fuel, yard chemicals, and solvents out of the cooler.
3. Check out Float
You should check the safety valve after every pump cycle. You can check the float to ensure it is not too high.
4. Maintenance Distance
Equipment for maintenance needs should be allowed at least three feet of clearance. This code requirement applies to all electrical parts.
5. Closed-Eye Hooks
Closed-eye hooks allow you to hang coolers safely and securely. Remove the frame carefully, and do not pull the open-eye hook off its chain.