When working at a height, there is always the possibility of taking a tumble. Although removing workers’ need to do their duties while standing or sitting at a height is the most effective method for ensuring their safety, this may only sometimes be feasible.
It is possible to lower the risk of falling by utilizing control methods such as fall arrest, temporary edge protection, and restraining systems such as an edge protection system or edge protection system. These kinds of measures can be employed together or separately.
What Exactly Does “Roof Edge Protection” Refer To?
Protection for the roof eaves In the construction business, this is the enclosure or structure that is utilized most frequently to reduce the risk of accidents involving falls from heights. It is an essential component of the safety system when constructing residential dwellings, commercial buildings, and other structures.
When working at height is unavoidable, scaffolding provides essential options for working safely at heights. They protect individuals, pieces of equipment, and materials from going too close to the edge or tumbling over the ledge al together. Employees in the construction industry have several forms of roof edge protection erected around the roof’s perimeter. This is done to assure the workers’ safety and security. You must purchase roof edge protection of the highest possible quality and compliance level.
When Is The Appropriate Time To Use Roof Edge Protection?
When work needs to be done on the roof, roof edge protection is an absolute need. Working on roofs demands moving about above ground level, which increases the risk of injuries that might be life-threatening or even deadly.
If you are getting ready to start a construction project, whether it is for a commercial or residential building, you must install the appropriate protection in roof. Protective precautions must be taken on every roof, no matter how temporary or permanent it will be covered.
Protecting the roof’s edges with roof edge protection is the only way to guarantee that there are safety measures in place to prevent falls from the roof.
Working At Heights, According To Australian Law
Before you can access any roof higher than ground level, 2 meters in height, or has a slope greater than 26 degrees, the Work Health and Safety Act of 2011 mandates that you first install an edge protection device or a fall arrest device.
The person who is in charge of the company or endeavor is responsible for ensuring the following things:
Controls for preventing falls, such as edge protection and travel restraint systems, are installed so that a person cannot fall from any height or when it is physically impossible to avoid falling.
A fall arrest is a way of arresting a person for falling (for example, a fall arrest harness or catch platform is used to prevent or limit the risk of damage or death resulting from falls).
You may get more information about the requirements for these control measures outlined in the WHS regulation by looking here: s.306E and s.306J.
Options For Protecting The Roof’s Edges
Brisbane, Gold Coast, and northern New South Wales customers may take advantage of the many services Australian Scaffolds offers, including edge protection rental, consulting, and scaffolding solutions.
We provide scaffolding rental services and a comprehensive selection of roof safety devices to cater to your construction requirements. We make it our mission to eradicate the dangers to workers’ health and safety posed by the varying heights at which they are required to do their jobs.
To fulfill the necessities of your construction and repair projects, we can mount safety rails and hang-on platforms on various buildings and structures. Our systems’ installation is straightforward, offers protection for your property, and is compliant with Australian Standards. You can contact australianscaffolds.com.au.